Indoor Air Quality Monitor-ZG106 SERIES

Indoor air quality (IAQ) refers to the air quality within and around buildings and structures, which effects the individual health in a number of ways. IAQ Monitor measures the presence & quantity of gases, particulates, microbial contaminants or any mass or energy stressor that can induce adverse health conditions.


1 Cost-Effective CO2 monitors made with IR-SOC technology 2 NDIR technology to Improve the long term Stability 3 The Alarm mode will sound at 1000PPM or adjust Alarm level 4 Several Modes for adjusting the setting parameters 5 Portable, accurate handheld CO2 Monitor


Method: NDIR Display: LCD Independent CO2 and Temperature Readings Calculates Displays Ventilation Rates Sample Method: Diffusion or flow through (50-200ml/min)

Performance:- CO2 Channel

Flow rate

ZG 106

ZG 106A-M

Measurement Range




1ppm at 0-1000ppm
5ppm at 0-2000ppm
10ppm at 0-3000ppm

1ppm at 0-1000ppm
5ppm at 1001-2000ppm
10ppm at 2001-4000ppm
20ppm at 4001-6000ppm
40ppm at 6001-10,000ppm

Accuracy: ±50ppm or ±5% of Reading
Repeatability: ±20ppm
Temperature Dependence: ±0.1% of Reading per °C or ±2ppm per °C Whichever is greater, referenced to 25°C
Pressure Dependence: 0.13% of Reading per mm Hg(Corrected via user input for attitude)
Response Time: < 2min for 63%of Step Change
Warm-up time: <60 Seconds at 22°C
Response time: < 2min for 63%of Step Change

Performance – Temperature Channel
Temperature Range: Display 32 to 122 °F (0 to 50 °C)
Display resolution: 0.1°F (0.1°C)
Display Options: °C/°F or Off . Set up with Up/Down button
Accuracy: ±2°F (±0.1°F)/td>
Response Time: 20-30 minutes
Calibration Interval: 12 Months

OC- Normally Low, 100mA max.@24 VDC.Adjustable set point
Factory setting is 1000 ppm
One RJ-45 Connector Digital output in R11 protocal
One graphing Software ZyAura view (Under Developing)
Power Supply
Two Power Supply types
Battery type: Alkaline, AA * 4 (80 Hours)
External: 6 VDC from External AC/DC adapter
Which included in package (Use specified AC adapter only)
Power Requirement
160mA Peak, 15mA average from 6V
General Operating Conditions
Operating Temperature: 32-122 °F (0-50 °C), 0-95% RH, non-condensing
Storage Temperature: -4 to 140°F (-20 to 60°C)