The Rare Gas Purifier-2000 is a stand-alone unit for the purification of argon or any of the other rare gases: helium, neon, xenon & krypton.
It offers a compact system for delivery purified gas directly to the point of use. The purifier contains two reactive getter tubes and a molecular sieve drier tube
housed in a cabinet for immediate use. Just plug into the local AC power supply, turn on the power and you are up and running.
Specifications
| Furnace Temperature |
: 700°C+/-40°C |
| Furnace Warm-Up Time |
: 15 min |
| Furnace Temperature Control |
:Thermocouple feedback circuit |
| Operating Ambient Temperature |
: 0-45°C |
| Maximum Recommended Flowrate |
: 15 litres/minute |
| Inlet Pressure |
:5-250 psig (0.3-17 bar) |
Gas Connections
|
:6.35mm(1/4 in.) O.D. stainless steel compression fittings |
Impurities Removed
|
:Oxygen, Nitrogen, Hydrogen, Hydrocarbons, Carbon Monoxide, Carbon Dioxide and Moisture |
Outlet Gas Purity
|
:Less than 1 vpm in total (as describe above) for typical input impurity levels of 50 vpm |
| Electrical Supply |
:210-240V, 1500 watts, 50-60Hz |
| Cabinet Dimensions |
:635 X 380 X 280 mm |
| Weight |
:30 kg (Apx). |
Features
- Point-of-use purification of commercial grade rare gases-total impurities reduced to a level of less than 1 vpm.
- Fast warm-up time.
- Automatic thermocouple temperature control system.
- Immune to wide fluctuations in amblent temperature and electrical supply.
- Quick-connect, self-sealing gas connections.
- Easy to operate and service.
Application
- Purification of argon or helium for spectrometric analysis.
- Purification of argon or helium carrier gases for low level gas chromatographic analysis.
- Purification of rare gases for use in semiconductor manufacture.
- Purification of argon or helium for use as inert gas blankets
About Us